Baumer CombiPress PFMH Manual do Utilizador descarregar pdf (Página 5)

www.baumer.com

CombiView

™

DFON display

There are 9 different display modes available

Digital Analogue Bar graph Tank

small analogue horizontal tank illustration

large same w. bar graph vertical bottle illustration

same w. value

Electrical connection

Pin 1 + 4…20 mA (not connected)

Pin 2 - 4…20 mA (not connected)

Pin 3 Relay 1

Pin 4 Relay 1

Pin 5 Relay 2

Pin 6 Relay 2

Com 1 FlexProgrammer ① red

Com 2 FlexProgrammer ② black

The PFMx with DFON display is delivered with terminal 1 and 2 not connected. The DFON is powered and will have data direct

through a special ribbon cable (UnitCom). Via UnitCom the DFON and PFMx transmitter can be programmed together when con-

necting the FlexProgrammer to Com 1 and COM 2 on the back of the display.

Pin 3 and 5 can be jumpered together if common supply is used for the two relays, e.g. via a M12 5-pin connector. Two galvanic

separated relay outputs will require a 8-pin M12 connector if plug connection is required. If cable glands is used the terminals 4...6

is connected via the screw terminals.

Electrical connection

Operators instructions

CombiPress™, type PFMx

UnitCom

Operators instructions: 11120948 PFMx Page 5 / 12

Electrical connection

M12, 5-wire M12, 8-wire

1 + supply, 4...20 mA 1 n.c.

2 Common for relays 2 + supply, 4...20 mA

3 - supply, 4...20 mA 3 Relay 1

4 Relay 1 4 Relay 1

5 Relay 2 5 Relay 2

6 Relay 2

7 - supply, 4...20 mA

8 n.c.

Cable gland

Transmitter

- - supply, 4...20 mA

+ + supply, 4...20 mA

Com 1 Red clip (FlexProgrammer)

Com 2 Black clip (FlexProgrammer)

Display

1 n.c.

2 n.c.

3 Relay 1

4 Relay 1

5 Relay 2

6 Relay 2

Com 1 Red clip (FlexProgrammer)

Com 2 Black clip (FlexProgrammer)

1 2 3 4 5 6 7 8 9 10 11 12

Comentários a estes Manuais

Sem comentários

Baumer CombiPress PFMH Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Baumer CombiPress PFMH