Baumer BA DABx AD2T Manual do Utilizador descarregar pdf (Página 12)

DABx_AD2T_BA_V1_0m.doc 12/20 Baumer Electric AG

01.04.09/rut Frauenfeld, Switzerland

1 Functional description

The DABU AD2T is a bridge amplifier for strain gage bridges containing following features:

• Very good signal to noise ratio, even at highly dynamic applications

• Analog output signal

• Tare function (RESET)

• Amplification of 2 x ¼ bridges and full bridges possible

2 Safety and operating notes

2.1 Use as specified

• The bridge amplifier must be operated exclusively at the specified purposes.

2.2 Putting into operation

• The bridge amplifier must be mounted only by a qualified electrician.

• Wiring on the plug or in the control cabinet must be carried out only in the off-power state.

• Follow the machine manufacturer's instructions.

2.3 Safety notes

• Before the system is put into operation, check all electrical connections.

• If the mounting, electrical connection or other work on the bridge amplifier is not carried out

correctly, wrong functioning or failure of the charge amplifier may result.

• Danger to personnel and damage to the system and operating equipment because of failure or

wrong functioning of the bridge amplifier must be excluded by suitable safety actions.

• The bridge amplifier must not be operated outside the limits which are given in the Technical

Data.

Failure to observe the safety notes can result in wrong functioning and material and

personal damage!

2.4 Transport and storage

• Transport and storage only in original packing

• Do not let the bridge amplifier fall or allow it to be shaken vigorously

2.5 Organisational actions

• Ensure that the personnel have read and understood the operating instructions, particularly the

section "Safety and operating notes".

• In addition to the operating instructions, generally applicable legal and other binding regulations

for accident prevention and environmental protection must be reliably observed.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Baumer BA DABx AD2T Manual do Utilizador Página 12