Baumer BA Scatec2 Gripper Manual do Utilizador descarregar pdf (Página 7)

20101215_Shortmanual_ScatecDCC_EN.doc 7/10 Baumer Electric AG

15.12.2010 / wej Frauenfeld, Switzerland

2.2 Version B

Situation:

Scatec can be moved along the conveyor

Position of the synchronization sensor is fixed

Test objects:

Put bright products in gripper

Adjustment:

Move the gripper slowly and stop immediately when the synchronization sensor switchs ON.

Adjust the position of the Scatec along the conveyor until the laser spot lies about 5 mm (b) behind the

holding point. Behind the gripper means, that the light spot is lower than the holding point. . The optimum

setting accuracy is + / - 5 mm.

Scatec

Leading plate

magazines

gripper

Holding point

direction of

transport

1 2 3 4 5 6 7 8 9 10

Sem comentários

Baumer BA Scatec2 Gripper Manual do Utilizador Página 7