Baumer SXC cameras Manual do Utilizador descarregar pdf (Página 2)

Camera Link

, Process Interfaces and Power Supply

Base Camera Link

Pin Signal Pin Signal Pin Signal

1 GND 10 CC2+ 19 X3+

2 X0- 11 CC3- 20 SERTC-

3 X1- 12 CC4+ 21 SERTFG+

4 X2- 13 GND 22 CC1+

5 XCLK- 14 GND 23 CC2-

6 X3- 15 X0+ 24 CC3+

7 SERTC+ 16 X1+ 25 CC4-

8 SERTFG- 17 X2+ 26 GND

9 CC1- 18 XCLK+

Caution

A power supply with electrical isolation is required for proper operation

of the camera. Otherwise the device may be damaged.

Power Supply Process Interface

7 3

1 (bn) Power V

1 (wh) Out 3 5 (gr) IO Power V

3 (bu) GND 2 (bn) In 2 6 (pk) Out 1

4 (bk) NC 3 (gn) In 1 7 (bu) Out 2

4 (ye) IO GND 8 (rd) In 3

LED Signaling

Signal

Meaning

green Power on

green / yellow ashing Readout active

green Conguration command processing

red (yellow on both) Transmitting

Heat Transmission

Caution

Provide adequate dissipation of heat, to ensure that the temperatures

does not exceed +60°C (+140°F).

The surface of the camera may be hot during operation and immediately

after use. Be careful when handling the camera and avoid contact over a

longer period.

T: Housing temperature

measurement point

As there are numerous possibilities for installa-

tion, a specic method for proper heat dissipa ion

is not dened, but the following principles are

suggested:

Operate the cameras only in mounted condition ▪

with a good heat conductor (e.g. aluminum)

Mounting in combination with forced convection ▪

may provide proper heat dissipation

General Description

No. Description No. Description

1 (respective) lens mount 4 CameraLink

Base socket

2 Power Supply 5 Signaling-LEDs

3 Digital IO-supply

1 2

16 x M3 depth 6 1
UNC 1/4-20 1

Comentários a estes Manuais

Sem comentários

Baumer SXC cameras Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Baumer SXC cameras